How do I check the battery on my Sena SMH10R?
When you power on the headset, keep pressing the Center Button and the (+) Button simultaneously for several seconds until you hear high tone triple beeps. Then you will hear a voice prompt indicating the battery level.
How do you charge a Sena SMH10R?
You can charge the SMH10R on a helmet by connecting the supplied USB power & data cable or cigarette charger. You can use any standard micro-USB cable to charge the SMH10R. headset is powering on. indicating the battery level.
How do I charge my Sena Bluetooth?
You can charge the SX.COM by connecting the supplied USB power & data cable into a computer USB port or USB wall charger. You can use any standard micro-USB cable to charge the SX.COM. The LED turns red while charging, and turns blue when the headset is fully charged. It takes about 2.5 hours to fully charge.
Why wont my Sena turn on?
When the SMH10 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset button at the back of the headset main unit. Insert a paper clip into the reset pinhole and press the reset button for a second with light pressure.
How long does a Sena 30K battery last?
Sena 30K Battery Life A Sena 20S offers 13 hours of Talk Time, while the 30K running in mesh mode provides eight hours. For most riders eight hours is more than enough, but if you are like us, you often end up riding long days.
How do I update Sena smh10r firmware?
Download and install the Sena Device Manager on your computer. Update the firmware of your Sena product with the Sena Device Manager. Reset your Sena product to the factory default setting (refer to the User’s Guide) and pair your Sena product with your Bluetooth device again. Click here for Firmware Release Notes.
How do you check a Sena battery?
When the headset is powering on, the red LED flashes rapidly indicating the battery level. When you power on the headset, keep pressing the Jog Dial and the Phone Button simultaneously for about 3 seconds until you hear three, high toned beeps. Then you will hear voice prompt indicating the battery level.
How do you check the battery on a Sena smh5?
When you power on the headset, keep pressing the Jog Dial and Phone Button simultaneously for about 3 seconds until you hear three high tone beeps. Then you will hear a voice prompt indicating the battery level.
What kind of Charger do I need for Sena smh10?
Sena provides Cigarette Charger and optional DC Power Charger with USB power cable for charging SMH10. Also, any certified USB power charger from other manufacturers can be used to charge the SMH10. The enclosed car charger can be used with 12V, 1A output without any problem because the charging circuit of the SMH10 accepts 5V~14V+ level.
What to do if your smh10r wont power on?
Then power on the SMH10R by pressing the Center button and Plus button at the same time. If the SMH10R doesn’t power on completely then that is ok. Press “Next” on the Device Recognition screen and you should be able to update the firmware normally. I had the same problem.
How can I restart my Sena smh10r battery?
Pretty annoyed, the lack of support is astonishing. @Harry Hansen: Try plugging the SMH10R, with the battery connected, into your computer and restart the Sena Device Manager. When you get to the Device Recognition section, use a paperclip to press on the reset button that is underneath the circular indentation near the Plus button.
How does Bluetooth pairing work on Sena smh10r?
Multipoint Bluetooth pairing allows the SMH10R to connect two HFP devices at the same time: mobile phone and GPS navigation. Follow the steps below to pair the GPS using multipoint pairing. 1. To enter the voice configuration menu, press and hold the Center Button for 12 seconds until you hear the voice prompt, “Configuration menu”.