What is electronic choke in tube light?
Tube Light Electronic Choke
| Ballast type | Electronic ballast |
|---|---|
| Start method | Instant start |
| Brand | Magiclite |
| Type | Mini sumo |
| Input current | 0.12A |
What chokes are used in tube lights?
Electrical choke is nothing but an inductor which is connected in series with vapor lights. i.e electrical choke is mostly used in mercury vapor lights, sodium vapor lights, tube light fitting, CFL bulbs (Compact florescent lights) etc.
How tube light circuit is connected?
A wire already connects port 2 and pin 1 of the terminal 2. From another terminal of the switch the wire is carried out up to tube light set up and connected to port 1. One terminal of choke or ballast is connected to port 1 and another terminal is connected to pin 1 of terminal 1.
Why choke is connected in the circuit of a fluorescent tube explain it?
Choke is a inductive coil(wire wound on iron core, made up of iron stampings). Then the voltage in the tube drops (typicaly to about 100 V), the current keeps the electrodes hot and, because the ionized gas has a negative resistance, the impedance of the choke limits the current.
Why capacitor is used in tube light?
Fluorescent lamps form an inductive load on the AC mains supply. As a result large installations of such lamps suffer a poor power factor and resultant voltage drop. Adding a capacitor to each lamp corrects the power factor bringing it back close to unity (1.0).
How do I know if my tube light is working?
Using a multimeter will determine if the electrodes still hold conductivity. If the electrodes are not intact, the bulb will not have a current running through it. Place the probes on both pins of the tube light to get an accurate reading. If there is no reading on the multimeter, the bulbs should be replaced.
What is the price of LED tube light?
LED Tubelight Price list in India (September 2021)
| LED Tubelight NAME | PRICE |
|---|---|
| Philips Astra Line 20 W 4 Ft Straight Linear LED Tube Light(White, Pack of 2) | Rs.804 |
| halonix LED BATTEN STREAK SQUARE 20W CW Straight Linear LED Tube Light(White, Pack of 3) | Rs.699 |
| Syska SRL Base B22 9-Watt LED Bulb (Pack of 10, Cool White) | Rs.777 |
How do I know if my electronic ballast is working?
To measure it, set your digital multimeter to around a thousand ohms resistance setting. Connect the black leads to the white ground wire on your ballast. Afterward, test every other wire with the red lead. When you do this test, a good ballast will return an “open-loop” or max resistance.
Is the capacitor used in tube light?
Tube Light Wiring Diagram with Capacitor A tube light consists of a filament & a choke coil or inductor coil for the lightening purpose. The capacitor can reduce radio interference due to switching activity; The capacitor can improve the overall power factor of the system.
What is the working principle of tube light?
“ As the name indicates, the tube-shaped fluorescent lamp is called tube light.” It works on the principle of low-pressure mercury vapor discharge phenomenon, which converts UV rays into visible rays with the help of phosphor-coated inside the tube.
What kind of choke does a tube light use?
Electronic Ballast Choke Tube light wiring is simple as normal tube light or it is even simple. Here we don’t need to have starter element we can directly connect electronic choke or electronic ballast to the mains power supply and then output terminals to the tube light right and left holder that’s it.
What kind of wiring does a tube light use?
Connection of tube light is very simple because it has few wiring points only. Tube Light connection diagram shown here is suitable for common type fluorescent tubelight. The tube light or fluorescent light is a low pressure mercury vapor gas discharge lamp and it uses fluorescent to produce white light. Tube light wiring diagram
How to make a tube light on YouTube?
To avoid this, cancel and sign in to YouTube on your computer. An error occurred. Please try again later. (Playback ID: hI0EcAdMCx7tNqtC) An error occurred while retrieving sharing information. Please try again later.