Most popular

Can you record vocals with a Shure SM57?

Can you record vocals with a Shure SM57?

The SM57 Can Be Used on Studio Vocals. You can definitely record excellent-sounding vocals with an SM57 if you know what you’re doing. In some cases, an SM57 might even give you better results than a LDC microphone costing 20x more. The key is know when to use it and how to use it.

Is Shure SM57 good for guitar?

The Shure SM57 is the best microphone for recording guitar and has become the industry standard for professional recording studios. It’s difficult to believe that such an affordable microphone would be used by professional recording studios across the globe.

Can you run vocals through a guitar amp?

While acoustic guitar amps are designed to be able to process vocals through a microphone at the same time as your guitar signal, electric guitar amps aren’t. But if you don’t have money to buy a proper PA System, it is possible to play vocals through your guitar amp.

Should you record acoustic guitar in stereo?

Simply put, if you want to record the best possible range of high and low frequencies for your acoustic track, using stereo recording is your best bet, otherwise you will end up with a fraction of the frequencies that are not nearly as wide in range.

Is the Shure SM57 a condenser mic?

Dynamic microphones like the Shure SM57 and Shure SM58 are legendary for not only their good sound quality, but also for the amount of abuse they can withstand. Dynamic microphones don’t require their own power supply like condenser microphones. However, their sound quality is generally not as accurate.

Can you mic a guitar amp with an SM58?

Can I use SM58 for my guitar amp? The SM58 is same as the SM57, except the SM58 has a ball-shaped grille. Either model is a good choice for miking a guitar amp. The sound pressure from the guitar amp will not damage the SM57 or the SM58, no matter how loud you set the amplifier.

How close should a mic be to a guitar amp?

Typically, a guitar amp is close mic’ed to achieve the highest direct sound. Placing the microphone roughly 4 inches from the grill, aimed directly at the center of the loudspeaker will produce the most “edge” to your sound. If you move the mic further away, it takes the edge off the sound. It’ll be a bit mellower.

Can you put vocals through a bass amp?

In short, yes. You can run vocals through a bass amp. A microphone can be plugged into a bass amp, and you can sing through it without any potential damage. However, the vocals will not sound great because bass amps cannot play most of the mids and high frequencies of the vocals.

Is it possible to record vocals with a sm57?

You can definitely record excellent-sounding vocals with an SM57 if you know what you’re doing. In some cases, an SM57 might even give you better results than a LDC microphone costing 20x more. The key is know when to use it and how to use it.

What’s the best use for a sm57 mic?

The most popular use for the SM57 tends to be to record guitar amps/cabinets. As a dynamic mic it can take the loud SPLs of the amp without overloading. Plus as a very midrange focused mic it really brings out some of the best characteristics of the electric guitar.

What’s the difference between the SM57 and SM58?

The SM57 and the SM58 are based on the same cartridge design, however the main difference is the grille. The SM58 uses a ball grille which is designed for vocal use since it acts as a pop filter. The SM57 was designed for recording instruments and that’s why it has a smaller grille, because pops and winds are not a concern.

How much does a Shure SM-57 mic cost?

The trick is to navigate the sea of advertising and find the best bang for your buck. You likely have heard of the Shure SM-57 microphone (if you don’t already own one). It’s a super affordable ($99 new), super popular dynmaic mic.

Share this post