Common questions

What is the suffix for formation?

What is the suffix for formation?

4 Suffix

-plasia formation, development, growth hyperplasia
-plasm growth, substance, formation cytoplasm
-plasty surgical repair rhinoplasty
-plegia paralysis ophthalmoplegia

What is bearing suffix?

SKF bearing suffix identify designs or variants, which differ in some way from the original design or from the current basic design. The suffixes are divided into groups. When more than one special feature is to be identified, suffixes are provided in the order shown in the table below.

What do bearing codes mean?

The first digit indicates the width or height series (dimensions B, T or H). The second digit identifies the diameter series (dimension D). The last two digits of the basic designation identify the size code of the bearing bore. The size code multiplied by 5 gives the bore diameter (d) in mm.

What is prefix word formation?

A prefix is a letter or a group of letters that we add to the beginning of a word. Prefixes change the meanings of words. For example, the prefix un- (or u-n) can mean “not,” “remove,” or “opposite.” Adding un- to the word “happy” gives you the word “unhappy,” which means not happy.

Which suffix means to form an opening?

suffix -ostomy
The suffix -ostomy means to surgically create an artificial opening or stoma.

What does CM mean on bearings?

radial internal clearance
“CM” radial internal clearance for deep groove ball bearings.

What does V mean in bearings?

“V-shaped” marking A “V-shaped” marking on the outside surface of the outer rings of matched bearing sets indicates how the bearings should be mounted to obtain the proper preload in the set. The marking also indicates how the bearing set should be mounted in relation to the axial load.

What are suffixes means bearing or producing?

A suffix is a form of affix that is attached at the end of the stem form of a word. Suffixes can change the meaning of the word and usually the new word is used as an adjective or descriptive word. From the choices given, the suffix that means “bearing or producing” is letter A. -oferous.

What is the suffix for bearing?

The suffix CV means the bearing is full compliment (flanges both sides top and bottom) and will not allow axial displacement. If an N follows the suffix, it means the outer race has a snap ring groove, if NR it includes the snap ring. If a J follows it means it has a stamped steel cage, roller centered.

What is a bearing letter?

What Those Bearing Letters And Numbers Mean: Suffixes are used to identify designs or variants which differ in some way from the original design, or which differ from the current standard design, each bearing manufacture have there own suffix & this is where it becomes a little confusing.

Share this post