Does Moog make U-joints?
PREMIUM UNIVERSAL JOINTS FOR PASSENGER CAR AND LIGHT TRUCKS MOOG ® Premium u-joints bearing cups are cold-forged and case-hardened. Their radial design allows 360˚ lubricant distribution to all bearing surfaces, while the steel cross incorporates a grease fitting for easy maintenance.
Are U-joints interchangeable?
Inner vs Outer Lock Nearly all U-joints have one side that is pressed into a welded-in yoke while the other side bolts into the other yoke. The press-in sides use C-clips to hold the caps in place. There are outside and inside locks, and in most cases they are not interchangeable.
What does a Moog 338 U-Joint fit?
Fitment U-Joint moog-338 fits these vehicles: Ford F Super Duty 1988 thru 1997.
How do I know which U-Joint to buy?
For U-joints with outside snap rings, you will need to measure from the edge of one u-joint cap straight across to the edge of the other u-joint cap. With these dimensions, it will be easy to identify what series of U-joint that you have. Another way to identify a u-joint is by properly measuring the pinion yoke.
Is Spicer better than Moog?
Frankly, there’s a very simple answer: If you drive a Jeep, I recommend you to go for Spicer joints. This specific U joint is the absolute best replacement part you can get for virtually all Jeep models. For most other vehicles – and especially light trucks or commuter cars, MOOG are an affordable and optimal solution.
How long can you drive with a bad U joint?
A car with a bad U-joint will break down in a few hundred miles at the maximum. But if you have a bad U-joint and you are having a transmission fluid leakage, you should not drive your car since the U-joint may break down anytime and will cause damage to the brake line, drive shaft, transmission line and other parts.
Are Spicer U joints better than Moog?
How many U joints does a Polaris RZR have?
1000 U-Joints
Polaris RZR XP 4 1000 U-Joints.
What is the difference between a 1310 and 1350 U joint?
Size comparison between the 1310, 1350, and 1410 series U-joints. “A 1350 series joint is a bigger stronger joint,” Woods explained. The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque. While the 1310 series, the stock size for most Jeeps, is rated for 1,600 lb-ft of torque.”
What is a 1310 U joint?
1310 U-Joint Series is the most common U-Joint ever used. It is still used on OE applications. 1.062 cap and 3.219 width. ( 1 1/16 x 3 1/4 close) 1330 U-Joint Series is very common and used on OE production.
How to look up driv-Moog U-joint type?
1. Select U-Joint Type 2. Select Bearing Diameters Did you find what you were looking for? Select a Reason… Wrong Application Wrong Image Wrong Specifications Missing Application Missing Image Missing Part Missing Specifications Interchange Request Where to Buy Other What were you looking for? Drag a column here… Loading…
Where can I find a Moog universal part number?
Many times, universal joint part numbers cannot be easily identified, especially by application. Using the online catalog database, MOOG ® makes it easy to correctly determine a replacement MOOG universal joint part number. Here’s what you need to get started:
What kind of U-joint does a Polaris quadlogic use?
Napa 338, Moose, All Balls, Quadlogic… any with a grease fitting… If you actually grease it every few rides…. If not, just get the greaseless. front prop shaft u-joint is sloppy. did some research and saw some mixed info. is polaris 2202015 u-joint the same as moog 338 u-joint? or do modifications need to be made in order to use the 338 joint?
What’s the best way to replace Moog bearings?
Grooved round bearings: Remove grease boots and ensure caps are fully seated by applying tight pressure using a C-clamp or a vise at both ends of cups (tight enough that the U-joint cross body can be turned by hand). Measure the inside edge of the lock ring groove on one bearing across the joint to the same point on the opposite bearings.