How do I fix the power button on my Nook?

How do I fix the power button on my Nook?

To fix unresponsive buttons, soft reset the device. To soft-reset the device hold the power and “n” buttons together for 10 seconds, then to turn the device back on hold the power button for 5 seconds (as opposed to the usual 2 seconds).

How do you fix a nook that won’t turn on?

Unresponsive NOOK Device

1. Confirm the microSD™ card slot is empty.
2. Press and hold the power button for 20 seconds, then release the power button.
3. Press the power button again for 2 seconds to turn on your NOOK.
4. If unsuccessful, charge the device via a wall outlet using the USB cable and AC adapter for several hours.

How do I unfreeze my Nook?

Unfreezing a Frozen NOOK

1. Press the power button, hold it down for 20 seconds, and then release it. That turns off the NOOK.
2. Wait a minute and press the power button for 2 seconds. That turns it back on again. All should be well.

How do you hard reset a NOOK Color?

How to Restore Nook Color Defaults

1. Hold the “Power” button for at least five seconds to power off the Nook Color.
2. Hold the “Home” and “Power” buttons until the Nook Color powers on.
3. Press the “Home” button when the Factory Reset dialog is displayed.
4. Press the “Home” button to confirm the reset.

Where is the power button on my Nook?

On the upper left side of the NOOK Tablet, there’s a power button. Hold it for a second or two to turn off your NOOK Tablet; hold it again for a second or two to turn it back on.

Why will my nook not turn on?

If you know that your Nook has a sufficient charge, and yet it will not turn on, try to reset the machine. To perform a reset, hold down the power button for at least 20 seconds. After 20 seconds, let go of the button and then try to turn the Nook on by pressing the power button for the normal second or two.

Why will my NOOK not turn on?

Can you overcharge a NOOK?

A. The short answer is, “no.” Laptop batteries — and smartphone and tablet batteries — stop drawing electricity when full. So you can’t damage a battery by leaving it plugged in.

Why is my Nook Color not responding to commands?

Using the device for long periods of time could cause the device to freeze and not respond to simple commands. The device needs to be restarted. Hold power button on the top left of device to switch off. Sometimes bumping the device or dropping it may shift parts inside the device and cause the screen to not respond.

Where is the power button on a nook?

Ignore the “Power Off” prompt because the device will shut itself off as long as you press and hold the Power button. The Power button is located at the upper left of the device. Press and hold the Power button and the Home button (the “n” button below the device screen) simultaneously.

Why does my nook touch not turn on?

Failing that, hold down the power button and the “n” button at the same time for 20 seconds. If you have an SD card, remove it, then try powering back on. For some reason, Nook Simple Touches don’t always like to power up if there’s an SD card installed.

How do I Reset my Nook Color to factory settings?

Press the Home button (n) to agree. Another prompt will display asking for confirmation. To confirm, tap the Home button again. The factory reset process will begin; wait for it to finish, which only takes a couple of minutes. After the reset is done, your Nook Color will restart.