Lifehacks

Are Bosch injectors Low impedance?

Are Bosch injectors Low impedance?

Bosh fuel injectors are Custom manufactured High Flow Rate, low impedance, flow matched, hi performance, excellent atomization for modern multi valve engines.

Are Bosch 210 injectors high impedance?

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

What is a high impedance fuel injector?

High-impedance injectors, also called saturated fuel injectors, are sent a 11-1/2-amp current signal to open, and that current stays on until the injector closes. Once open, the signal drops to 23 amps. This design will open and close more quickly, but will also run hotter.

What is a low impedance fuel injector?

Low-impedance injectors, also called peak-and-hold injectors, are sent a more powerful electrical signal, usually around 56 amps, to open. Once open, the signal drops to 23 amps. This design will open and close more quickly, but will also run hotter. Most injectors that flow more than 70 lb/hr are low impedance.

What is the difference between high and low impedance injectors?

High-impedance injectors, also called saturated fuel injectors, are sent a 11-1/2-amp current signal to open, and that current stays on until the injector closes. Low-impedance injectors, also called peak-and-hold injectors, are sent a more powerful electrical signal, usually around 56 amps, to open.

Are Bosch 210 injectors good?

They are legit bosch, I just had them flow tested also and all was good. I’m making around 1100 rwhp ([email protected] 3500#) and these are running about 60% duty cycle. 40 psi base, 57 psi fuel pressure under boost. They idle great.

Are high impedance injectors better?

That low-amp current keeps the injector temperature lower, which makes it more reliable; that’s why the high-impedance design is the most common injector style for OEM applications. This design will open and close more quickly, but will also run hotter.

Do I need high or low impedance injectors?

How do I know if my injector is low impedance or high impedance? You can measure the resistance across the two electrical terminals of the injector. If the resistance is between 1.5 and 4.0 Ohm you have low impedance injectors. If the resistance is between 8 and 16 Ohm you have high impedance injectors.

Are there Bosch 2200 cc / min high impedance fuel injectors?

Genuine Bosch 2200 cc/min ( 210 lb/hr ) High Impedance Injectors ( Alcohol Compatible ) IMPORTANT NOTE: These injectors have NO SCREEN and MUST have a fine, 40 micron or finer pre-filter near the fuel rail! These Bosch injectors are NOT compatible with gas/petrol with MTBE content, such as VP Q16 and VP Import fuels or other MTBE oxygenated fuels.

What makes Bosch high flow injectors so good?

These new injectors from Bosch represent the next generation of high flow injector technology with fast response times, excellent flow pattern and compact design. The price and performance that these injectors represent to the performance aftermarket is unparalleled.

Is the Bosch fuel injector compatible with VP Q16?

IMPORTANT NOTE: These injectors have NO SCREEN and MUST have a fine, 40 micron or finer pre-filter near the fuel rail! These Bosch injectors are NOT compatible with gas/petrol with MTBE content, such as VP Q16 and VP Import fuels or other MTBE oxygenated fuels. This is not a problem in the vast majority of race and pump gas/petrol applications.

Share this post