Common questions

How do I pair CS3070?

How do I pair CS3070?

Press and Hold the Bluetooth button (round button, “M” logo) for five seconds. The scanner beeps and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the tablet.

How do I pair a symbol scanner?

Step 1: Turn on the scanner by pressing down on the ‘M’ button on the bottom of the scanner, until you see a green light appear at the top. The ‘M’ button’s blue light will flash slowly. Step 2: Scan the barcode below to place the scanner in pairing mode. Step 3: From the Android device, navigate to Bluetooth Settings.

How do I pair a symbol scanner to my iPad?

On your iPad, tap Settings > Bluetooth. In the Bluetooth panel, enable the Bluetooth switch. Under OTHER DEVICES, tap your barcode scanner. Once the pairing process is complete, your barcode scanner displays as Connected under MY DEVICES.

How do I reset the symbol scanner?

Reset your Bluetooth Barcode Scanner Press and hold the trigger button while pressing the power button. After 15 seconds, the scanner will beep. Release the trigger button. The scanner will beep 5 times and power off.

Where can I find the cs3070 Quick Reference Guide?

Symbol CS3070 Quick Reference Guide f2 Symbol CS3070 © 2010 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola.

What are the different configurations of the CS3000 scanner?

The CS3000 series scanner is available in the following configurations: • CS3000 – USB (batch), 0.5 GB Flash. • CS3070 – USB (batch) and Bluetooth, 0.5 GB Flash Each scanner includes a USB host cable. A charging cradle is also available for mounting, charging, and host connection.

How to scan bar codes with the cs3070?

Serial Port Profile (Slave) Bluetooth Keyboard Emulation (HID Slave) f8 Symbol CS3070 Numeric Bar Codes fQuick Reference Guide Enter f10 Symbol CS3070 Scanning To scan bar codes: 1. Aim the scanner at the bar code. 2. Press the scan (+) button. Illustration to come 3. Ensure the scan line crosses every bar and space of the symbol.

Where do I enter the pin on my cs3070?

Pairing the CS3070 with a host device typically requires entering a pairing PIN on both the CS3070 and the host device. To enter the PIN on the CS3070, use the Numeric Bar Codes for PIN Entry on page 1-24 . For the host device, use the data entry method required for that device to enter the PIN.

Share this post