How do you reset the drum counter on a Brother DCP 7030?

How do you reset the drum counter on a Brother DCP 7030?

Press the Up Arrow Key to reset the drum counter.

How can I save money on my brother toner?

Let’s get into how you can save on toner in your business and cut down on office expenditure.

1. Check Your Resolution Settings.
2. Think About Using Grayscale Print.
3. Toner Saving Features.
4. Lighter Print Density.
5. Stop Unnecessary Print Commands.
6. Your Fonts Matter.
7. Low Toner Warning; Don’t Fret About It.
8. Stop Unnecessary Printing.

How do you save ink on a Brother printer?

– Using Ink Save Mode Open Printing Preference. (Click here to see the details of how to open Printing Preferences.) Click the Advanced tab and check the Ink Save Mode. Click Apply => OK.

How do I change the ink cartridge in my Brother DCP 7055?

Replace Toner

1. Make sure that the machine is turned on.
2. Open the front cover and leave the machine turned on for 10 minutes to cool down.
3. Take out the drum unit and toner cartridge assembly.
4. Unpack the new toner cartridge.
5. Pull off the protective cover.

How to reset brother MFC 7340 drum counter?

Press the Up Arrow Key to reset the drum counter. When the LCD shows Accepted, close the front cover. Brother strongly recommends that customers use only genuine Brother drum units and/or toner cartridges Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations.

Is the brother ds-720d compatible with Windows 10?

Windows 10 Compatibility If you upgrade from Windows 7 or Windows 8.1 to Windows 10, some features of the installed drivers and software may not work correctly. Please uninstall all drivers and software in Windows 7 or Windows 8.1 before upgrading to Windows 10. For optimum performance of your printer, perform an update to the latest firmware.

What do you do if your drum unit says drum error?

Drum Error (Drum!) The corona wires have become dirty. Clean the corona wires in the drum unit. Click here to see how to clean the corona wires. The drum unit or the toner cartridge and drum unit assembly is not installed correctly. Reinstall the toner cartridge and drum unit assembly. Click here to see how to reinstall the toner cartridge.

What are the errors and maintenance messages on brother?

If this happens, your machine identifies the error or required routine maintenance and shows the appropriate message. The most common error and maintenance messages are shown below. You can correct most errors and routine maintenance by yourself. If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips.