How do I reset my Plantronics Savi headset?

How do I reset my Plantronics Savi headset?

Plantronics Headset Reset For Savi 700, Savi 400 and 8200 Series

1. Unplug the AC power from your Plantronics charging base.
2. Remove your battery (W730, W430 battery can’t be removed)
3. Wait 10 seconds then replug both the AC power and battery in like normal.
4. Place your headset in the charging base.

How do I reset my Plantronics Savi W740?

Plantronics Savi W740 and W745

1. Unplug the AC power from the charging base.
2. Remove the battery from your earpiece (If you don’t know where your battery is located, click here)
3. Wait 10 seconds then replug the AC power and battery back in.
4. Download the Plantronics Hub.

How do I pair my Plantronics Savi headset to the base?

STEP 1 From the settings menu of your mobile phone, get your phone into the Bluetooth pairing or search mode. STEP 2 Press and hold the Bluetooth pairing button on the front of the Savi charging base. STEP 3 Continue holding this button down until you see the pairing light begin to toggle between red and blue.

Why is there no dial tone on my Plantronics headset?

If you can’t hear a dial tone in your headset, try the following: Make sure your headset is charged. Make sure your headset is subscribed to the base. Adjust the configuration switch on the base until a dial tone is heard.

How do I troubleshoot my Plantronics headset?

If you are experiencing issues using your USB headset, try the following: Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports.

Why does my Plantronics headset keep turning off?

Cause Your phone is not configured correctly. You need the “Electronic Hook Switch” feature on the phone turned on. Resolution This feature can only be activated by your IT or phone system support. After they make the system side change, reset your phone by unplugging the line cord and re-connecting it.

How do I pair my Savi Bluetooth?

To Connect with a Mobile Phone: Press the Bluetooth pairing button on the base for about 4 seconds or until the indicator light flashes red and blue. Place your mobile phone into search mode. Select Savi 7xx from the list of found devices. If prompted for a passkey, type “0000” (4 zeros).

How do I pair my Plantronics headset to my phone?

To pair the headset,

1. Turn on your device’s Bluetooth feature.
2. Turn the headset on. The light on the headset should start flashing an alternating red-blue.
3. On your cell phone, go to the Bluetooth menu and search for (or add) a device.
4. If prompted for a passkey, enter 0000 (four zeros).

Why is my Plantronics wireless headset not working?

In the Device Manager window, find the Sound, Video and Game Controllers option and expand it. Right click on your Plantronics device and select “Uninstall”. Unplug the headset and restart the PC. After the PC has rebooted, reconnect the headset.

Why is my PLT headset not working?

Make sure that the microphone is not muted. Make sure the USB connection is not loose. Wait for your computer to recognize the USB connection, and then test the microphone again. Make sure that your Plantronics headset is selected as the default audio device.

Why did my headset stop working?

Check audio settings and restart the device There’s also a chance the problem isn’t with the jack or the headphones you’re using but has to do with the device’s audio settings. Just open up the audio settings on your device and check the volume level and any other settings that might mute the sound.

Why do my Bluetooth headphones keep cutting off?

– A low battery When the battery for your Bluetooth headphones isn’t fully charged, it’s going to cause more disconnections. Keeping it fully charged will prevent many of these issues with cutting out. When you buy a new set of Bluetooth headphones, keep an eye on it to see how long it takes to run out of battery.