Can you use telephone poles for pole barn?
Re: Telephone poles for pole barn They used creosoted poles, then they replaced those about 20 years ago with copper arsonate poles. Now they are banned.
How much does a 25 ft telephone pole cost?
A typical 45-foot class 3 pole, about 16 to 20-feet at the base, can cost about $150 to $700 depending on the type of wood and who you purchase it from….How much does a telephone pole cost?
|Pole Size||Price Range|
|25-foot||$100 to $200|
|30-foot||$100 to $350|
|35-foot||$250 to $425|
|40-foot||$350 to $550|
How deep should a telephone pole be in the ground?
Poles are typically set into the ground: 10% of the overall height + 2 feet, except in questionable soil conditions. Example: Overall pole height: 30 feet, the pole should be buried: 3 feet + 2 feet = 5 feet below grade, and 25 feet above grade.
How much does a 40 telephone pole cost?
So a 40-foot pole is set in a 6-foot hole, and is surrounded by compacted gravel. Batavia’s are made of southern yellow pine. The city hopes to get 40 to 50 years out of a pole. Cost: From $350 to $1,800.
What happens with telephone poles?
If nobody wants the older poles, they are taken to the service center and put on pallets, Meyers said. Such older poles are available, for free when they are available, to whomever wants them, he said. The poles, typically about 40 feet tall, are usually cut in half, Meyers said.
How long is a telephone pole?
Typical utility poles measure 30 to 60 feet for poles in residential neighborhoods, and from 60 feet to over 120 feet along major highways.
How deep should a Pole base be?
Most pole standard bases in commercial and retail parking areas are a minimum 6′ deep and they are usually 8′ deep. As far as a concrete pole pier this usually has to be worked out by a structural engineer familiar to you area.
Why do telephone poles have tar?
In addition to toxicity to fungi, insects, and marine borers, it serves as a natural water repellant. It is commonly used to preserve and waterproof cross ties, pilings, telephone poles, power line poles, marine pilings, and fence posts.
Is it safe to burn telephone pole wood?
DO NOT BURN OLD POLES!! They are listed as Hazardous Material in the disposal department. Which ever type of preservative they used to make the pole, there are serious advisories against burning them.
How much does a telephone pole weigh?
Wooden telephone poles weigh 900-1000 lbs and the depth of utility poles should be 10% X pole height + 2 ft = min depth.
How it’s made telephone poles?
Wooden telephone poles are often made from pine or cedar. Companies that manufacture telephone poles often chose the stems from pine or cedar trees because they match the natural characteristics to meet the engineering and design standards in order to support telephone lines.
How were telephone poles treated?
This is a basic consumer grade treatment. Telephone poles are put into a vacuum chamber. When exposed to a vacuum, moisture is pulled out of the wood. Either CCA, creosote , or both, are injected into the chamber and the vacuum reduced. The wood then soaks up the CCA and/or creosote.
What are telephone poles used for?
Telephone poles, usually made of wood in order to carry telephone cables around a whole country or even continent if needed, are often used to deliver phone services to houses and offices; however, this isn’t always the case. Private buyers often purchase telephone poles for various projects,…