Common questions

What is the resolution of a 12-bit ADC?

What is the resolution of a 12-bit ADC?

ADC has a resolution of one part in 4,096, where 212 = 4,096. Thus, a 12-bit ADC with a maximum input of 10 VDC can resolve the measurement into 10 VDC/4096 = 0.00244 VDC = 2.44 mV. Similarly, for the same 0 to 10 VDC range, a 16-bit ADC resolution is 10/216 = 10/65,536 = 0.153 mV.

What does 12-bit resolution mean?

4096
A 12-bit digital value can represent 4096 (212) different numbers. In the case of the LabJack U12, a single-ended analog input has a voltage range of -10 volts to +10 volts (20 volt total span) and returns a 12-bit value. This gives a voltage resolution of 20/4096 or 0.00488 volts per bit (4.88 mV/bit).

What is the best bit resolution in audio?

What Bit Depth Should I Use? For consumer/end-user applications, a bit depth of 16 bits is perfectly fine. For professional use (recording, mixing, mastering or professional video editing) a bit depth of 24 bits is better. This ensures a good dynamic range and better precision when editing.

What is the resolution of 10 bit ADC?

Resolution and Dynamic Range

Resolution Ideal Dynamic range Minimum Voltage Increment
8 Bit 256:1 3.92 mV
10 Bit 1024:1 0.98 mV
12 Bit 4096:1 0.244 mV
14 Bit 16384:1 61 μV

What resolution is 8 bit?

Which is the best decoder for Windows 10?

(Alternatively, some people have reported they sucessfully enabled MPEG2 in the ‘Microsoft DTV-DVD Video Decoder’ on Windows 10 following the 32bit install instructions at https://matthill.eu/tutorials/install-windows-10-dvd-player-free/) Lots of other decoders also work well.

Which is decoders do I need and recommendations?

Below is info on what decoders you need and recommendations, the TL;DR answer: install the LAV decoders from HERE, then go to the Settings->Decoders screen, and set everything to the LAV decoders Which decoders do I need? It depends on the country you’re in, the television system you’re using, and sometimes the device you use.

Which is the best decoder for MPEG-2 video?

The ArcSoft decoder, included with various Hauppauge applications is also a good alternative. The best options for MPEG-2 are the ‘LAV Video Decoder’, or the ‘Microsoft DTV-DVD Video Decoder’. Unfortunately this Microsoft decoder is only availble in some versions of Windows.

What kind of decoder do I need for NextPVR?

Here are some example decoder requirements for common user groups: USA/Canada: Usually require MPEG-2 video decoder, MPEG1 audio and AC3 audio decoders Freeview UK: Requires most decoders. MPEG-2 and H.264 video decoders, and MPEG1 audio, AC3 audio and HE-AAC decoders

Share this post