How do I reset my Brother HL 5370DW?
Reset the settings to factory default
- Power the machine off.
- Press down the GO button and power the machine on.
- Keep pressing GO until the all LEDs are on. The Status LED will be off.
- Release GO. All LEDs will be off.
- Press GO ten times. Your machine’s printer settings will be reset.
How do I bypass the toner light on a Brother printer?
- Power on the Brother printer.
- Open the toner access door located at the front of the printer.
- Press the “Clear/Back” button.
- Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.
- Press the “1” button to reset the toner cartridge display.
How do I reset my Brother HL 5240?
After changing a DR3100 drum unit in a Brother HL-5240, the printer’s page count needs to be reset. This will turn off the drum warning light on the printer. Simply open the front cover, and hold the “GO” button until all four LED’s are lit. Release the “GO” button and close the front cover.
How do I reset my brother hl 5350dn toner?
Brother HL5340D HL5370DW Toner Counter Reset – TN3290
- Open the front cover and leave open while completing the following steps.
- Turn the printer off.
- Hold the GO button while turning the printer on.
- When 3 led light up release the GO button.
- Press the ‘go’ button twice (3 LED’s should light up again).
Where is the IP address on a Brother printer?
Press the [Menu] and navigate to the WLAN tab (using the ▲/▼ arrows and the [OK] button) Press ▲ and select WLAN Status. Select Infrastructure Mode. The screen will display your network connection settings, your IP Address is listed on the third line.
How to reset a brother hl-5340d printer?
How to Reset a Brother HL-5340D printer. Step 1. Ensure that the printer is turned off before beginning. Step 2: Open the front cover of the Brother printer, this would be the cover where the toner and drum are put in, not the paper. The cover should remain open for the whole process, or until the printer directs you to close it.
How to reset toner counter on Brother printer?
Open the front cover and leave open while completing the following steps. Turn the printer off. Hold the GO button while turning the printer on. When 3 led light up release the GO button. Press the ‘go’ button twice (3 LED’s should light up again). Press the ‘go’ button 6 more times. Close the cover.
How do you reset the drum on a Brother HL 2320d?
Open the front cover. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. Close the front cover. Make sure that the Drum LED is now off. Click to see full answer.
Where is the toner drum on a brother printer?
Step 2: Open the front cover of the Brother printer, this would be the cover where the toner and drum are put in, not the paper. The cover should remain open for the whole process, or until the printer directs you to close it. Step 3: Hold the Go button down while you turn on the printer.