Do I need primer with PPG breakthrough?

Do I need primer with PPG breakthrough?

PPG PAINTS™ now offers an enhanced version of its interior and exterior Break-Through! The improved formula offers two notable benefits to both painting pros and their homeowner customers that set it apart. The first is that no primer is required in most cases.

What kind of paint is PPG breakthrough?

acrylic enamel
PPG BREAK-THROUGH!® is an ultra-durable waterborne acrylic enamel with excellent flow and leveling, outstanding early block resistance and very fast dry. It can be used for interior/exterior applications and on both horizontal and vertical surfaces.

How long does it take for breakthrough paint to cure?

DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity. To Touch: 15 to 20 minutes To Handle: 1 hour To Recoat: After 2 hours For Foot Traffic: 12 hours For Forklift Traffic: 36 hours To Full Cure: 7 days Drying times listed may vary depending on temperature, humidity, color and air movement.

Does BM advance need primer?

If you’re painting wood cabinets, our ADVANCE Primer (790) has great adhesion that provides the proper foundation for any ADVANCE finish. Do not use lacquer-based primers, as they can impede how ADVANCE adheres to the surface of the cabinets.

Does Benjamin Moore advance require primer?

New surfaces should be fully primed, and previously painted surfaces may be primed or spot primed as necessary. For best hiding results use Benjamin Moore® Advance® Waterborne Interior Alkyd Primer tinted to the approximate finish coat color.

How much does ppg BreakThrough cost?

Our Price: $75.00 BreakThrough provides hardness similar to or better than standard alkyds with a low VOC formula, but maintains flexibility to endure extreme bends and deformation without cracking and peeling.

Is Dulux the same as PPG?

Dulux is a registered trademark of AkzoNobel and is licensed to PPG Architectural Coatings Canada, Inc., for use in Canada only. Liquid Metal is a trademark of PPG Architectural Finishes, Inc.

Can you roll PPG BreakThrough?

When rolling only, tiny air bubbles can be made & they will dry in place. I’ll take a pic of the roller cover I use when rolling only. Here is that pic of the best roller covers I’ve found for rolling PPG Breakthrough… It both applies the paint & lays it off.

What’s the best paint for kitchen cabinets?

7 Best Cabinet Paint Brands for a Flawless Finish

• Farrow and Ball Full Gloss Paint.
• Benjamin Moore Advance Interior Satin Paint.
• Fine Paints of Europe Eurolux Acrylic Paint.
• Valspar Cabinet Enamel Semi-Gloss Latex Interior Paint.
• Rust-Oleum Cabinet Transformations System.
• Behr Alkyd Semi-Gloss Enamel Paint.

Do I need to prime cabinets before painting?

Painting kitchen cabinets is a multi-step process that can give you great results — if you do it right! Labeling your doors, cleaning and prepping the wood, priming, and sanding in between coats of paint are absolutely necessary for a great finished product.

Can you paint advance over oil?

An Introduction to Advance Like most interior paints, the product dries within a couple of hours after application. Advance’s advantage is that it allows contractors to paint over oil interior trim and doors without priming or the omission of heavy VOC’s.

What kind of primer do you use for break through?

Designed to bond with some of the most difficult substrates including fiberglass, laminates, plastics, concrete, and metal, Break-Through! is self-priming on most of these surfaces. For concrete, two coats are recommended—the first serves as the primer and should be thinned by about 10%, the second should be applied without thinner.

What can ppg break through enamel be used for?

PPG BREAK-THROUGH! ® is an ultra-durable waterborne acrylic enamel with excellent flow and leveling, outstanding early block resistance and very fast dry. It can be used for interior/exterior applications and on both horizontal and vertical surfaces.

What do you need to know about break through?

Results are comparable whether application is by spray or by hand. Designed to bond with some of the most difficult substrates including fiberglass, laminates, plastics, concrete, and metal, Break-Through! is self-priming on most of these surfaces.

What kind of paint does ppg break through?

PPG PAINTS™ now offers an enhanced version of its interior and exterior Break-Through! line of water-borne acrylic paint. The improved formula offers two notable benefits to both painting pros and their homeowner customers that set it apart.