Most popular

How do I reset my Xerox Phaser 6022?

How do I reset my Xerox Phaser 6022?

Xerox Phaser 6022/NI User Manual

  1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then.
  2. In CentreWare Internet Services, click Properties.
  3. To expand the menu, in the Properties pane, for the General folder, click the plus symbol (+).
  4. From the General menu, click Resets.

How do I connect my Xerox Phaser 6022 to WiFI?

  1. Open Easy Printer Manager.
  2. From your Printer List, select your printer.
  3. At the home screen, select Machine Settings.
  4. Select Network Settings.
  5. Under General, ensure Network Connectivity is set to Wireless.
  6. Under WiFI Settings, select Wizard.
  7. Follow the Wizard instructions to install your printer on WiFi.

Why does my Xerox printer keep going offline?

Your printer might appear offline if it can’t communicate with your PC. Select Start > Settings > Devices > Printers & scanners. Then select your printer > Open queue. Under Printer, make sure Use Printer Offline is not selected.

How do I fix my Xerox printer offline?

Printer is Offline in the Control Panel

  1. Make sure the printer has been set to “Use PrinterOnline.
  2. Disable SNMP in the printer port settings:
  3. If connected via a USB cable, try a new USB cable.
  4. Make sure the USB cable is connected directly from the computer to the printer.

How do I reset my Xerox Phaser 3250?

Reset the Printer to Factory Defaults

  1. Log in to the control panel as a System Administrator.
  2. Press the Home button.
  3. Touch Device > Resets.
  4. To reset the printer to factory defaults, touch Reset to Factory Defaults.
  5. At the confirmation message, touch Reset.

How do you clear error codes on Xerox?

Locate the Image Quality button, below the Auto on the Control Panel, toward the left side. Press the buttons in the following sequence within 4 seconds. Press [C] (Clear), press [Image Quality], press [C] (Clear) again, press [Image Quality] again. The error code should disappear.

How do I connect my Xerox Phaser to WIFI?

To connect wireless on 3260 using Xerox Easy Wireless Setup:

  1. Select Start>Xerox Printers > Xerox Easy Wireless Setup.
  2. Connect the machine to your computer using the USB cable.
  3. Select Next.
  4. Once the machine is connected to the computer with the USB cable, the program searches for WLAN data.
  5. Select Next.

How do I change my Xerox printer from offline to online?

Copy and Embedded Fax functions are not affected.

  1. Log on as the System Administrator.
  2. Press the Machine Status button.
  3. Select the Tools tab.
  4. Select Network Settings.
  5. Select Online / Offline.
  6. Select Online or Offline as required.
  7. Select Close to exit.

How do I reset my Xerox Phaser 6510?

Reset the Printer to Factory Defaults

  1. At the printer control panel, press the Menu button.
  2. Navigate to Admin Menu, then press OK.
  3. Navigate to Init/Delete Data, then press OK.
  4. Navigate to Delete All Data, then press OK.
  5. At the Press OK to init prompt, press OK.
  6. At the Press OK to delete all data prompt, press OK.

Share this post