What does push Power Protector mean on Sony surround system?
PUSH POWER / PROTECT / PROTECTOR is flashing in the display of the home audio device. If there has been an electrical surge or power outage, then the internal surge protection inside the home audio device may have been triggered to protect the device from the surge. This is normal.
How do I fix the Sony push power protector?
PUSH POWER / PROTECT / PROTECTOR is flashing in the display of the home audio device.
- Turn off the home audio device, and remove all speaker wires from the back. Then turn the device back on and check if the issue is resolved.
- Inspect the speaker cords.
- Make sure the speaker impedance is within the recommended range.
What does protector mean on my Sony receiver?
The Sony receiver protector error is designed to protect against a short circuit or power surge. With the Sony receiver in protect mode, external speakers will not function properly and a thorough assessment of the issue is required to remove the protection while preventing damage to the speakers.
What is the meaning of push power protector?
The PROTECT and PUSH POWER messages will flash alternately when the protective device of the amplifier has been activated because a strong signal was input, or if there is a short-circuit detected. To resolve the issue, turn the amplifier off and leave it off for at least 30 minutes.
Why does my Sony amp go into protect mode?
If the impedance of any of the speakers is below the rated impedance range indicated on the rear of the home audio device next to the speaker connections, the home audio device may enter the PROTECT mode. Raising the volume with a low impedance speaker will trigger the protection circuit.
How do I unlock my Sony surround sound?
How do I unlock my Sony surround sound system?
- Turn on the Home Theater System.
- Press the STOP button and the EJECT button simultaneously for five seconds.
- The message UNLOCKED will be displayed to indicate that DVD disc tray is unlocked.
How did Sony Home Theater push power protect error solved?
This customer was referred to me by another customer whom I had repaired his Sony Bravia television which had backlight problem. After the phone call I visited the client and was shown the home theater receiver, testing was done in the presence of the customer to confirm what he said was the symptoms as my usual practice.
Why is push power / protect / protector flashing in my speakers?
If the words PROTECT / PROTECTOR and PUSH POWER appear in alternating sequence on the display of your home audio device, or if the words PROTECT or PROTECTOR appear, there may be an external speaker issue or connection issue that is triggering the protection circuit.
Why is my Sony home audio protector flashing?
Sony Home Audio Protect Flashing 1 If there has been an electrical surge or power outage, then the internal surge protection inside the home audio device… 2 Ensure the top of the home audio device has proper ventilation to keep it from overheating. Running the home audio… 3 Reduce the volume level. If the impedance of any of the… See More….
Why is my push power protector not working?
If a cord is frayed or in contact with another terminal, an error will occur. Fix the connection to prevent a short circuit. Make sure the speaker impedance is within the recommended range. If the impedance is not correct, sound will not come out properly and the speaker may be damaged.