How do you hook up a 20 pin power supply to a 24 pin motherboard?
“… you can plug a 20 pin cable into a 24 pin motherboard and it will work just fine. At least, it will for a while. They added those extra 4 pins for a reason. When you plug a 20 pin cable into a 24 pin connector you’re not providing the extra current carrying capacity which may be needed by the motherboard.
How do you get a 24 pin?
Prominent. The way how I did it is that I push the clip, wriggle the connector from side to side, then pull out the connector. If the connector won’t come out, push the clip and wriggle some more. Make sure you are pushing the clip the whole time.
What is a 24 pin?
The ATX 24-pin power supply connector is the standard motherboard power connector in computers today. The connector itself is a Molex 39-01-2240 connector, often called a Molex Mini-fit Jr.
Can I use a 20 pin power supply in a 24 pin slot?
CONNECTING A 20-PIN PSU TO A 24-PIN BOARD. Technically, a 20-pin ATX connector can be plugged straight into a 24-pin motherboard socket, leaving male pins 11, 12, 23, and 24 unconnected. The power connector is polarized, so it’s difficult to insert it wrong into the header unless you force it really hard.
Why is my 24 pin stuck?
Some power connectors and their clips can be very tight. 2) Try a gentle rocking motion along the length of the power connector while pulling it out. This can help loosen it. 3) Try needle nose pliers to hold the connector clip open while gently prying the gap with a flat screwdriver.
What is 24 pin connector used for?
A 24-pin power supply adds an extra line each of 3.3 volts, 5 volts, and 12 volts, as well as an additional ground. These extra lines are used to satisfy the needs of newer technologies and more power-hungry peripherals. They also replace older 12 volt auxiliary connectors found on some 20-pin motherboards.