How do you reset the maintenance light on a Toyota Sienna 2021?

How do you reset the maintenance light on a Toyota Sienna 2021?

Reset Maintenance Light for Toyota Sienna 04-10 Models

  1. Turn the Vehicle On. Bring your key to the on position but don’t start the engine.
  2. Bring On the Odometer. The odometer must be coming up on the meter that is on your extreme left on the dashboard.
  3. Turn the Vehicle Off.
  4. Push the Button.
  5. Check the Light.

What does maintenance required light mean on Toyota Sienna?

Toyota Maintenance Required Light: This light comes on to remind you to change your oil. It comes on 5,000 miles after the last time it was reset. The maintenance-required light is easy to reset. On most Toyotas you simply: Turn the key to the on position.

How do you reset the odometer on a Toyota Sienna?

The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push. To reset the trip meter A to zero, display the meter A reading, then push and hold the knob until the meter is set to zero.

How long can I drive with my maintenance light on?

Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.

How to reset the maintenance light on a Toyota Sienna?

After some investigation at, I discovered the answer… With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B). Turn the car off (ignition key to the OFF position). Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.

How to reset maintenance required maintenance required light on?

Light Reset Instructions: Turn your ignition key to the ‘ACC’ or ‘LOCK’ position. Press and hold the trip meter reset nob (next to your Toyota Sienna’s odometer). While holding the trip meter reset nob, turn the ignition to ‘ON’, but do not start your Toyota Sienna.

How to reset the ” maint reqd ” light-Toyota?

Release the odometer button/knob . Turn key to OFF position . That’s it! The “MAINT REQD” light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so. Is High Octane Gas Worth the Money?

How to reset the maintenance light on a Toyota Highlander?

Press and hold the ODOMETER/TRIP button, and turn the ignition key to the “ON” position If your vehicle has an ignition button, press the ENGINE START/STOP button twice without touching the brake pedal Continue to hold down the ODOMETER/TRIP button until “000000” MILES appears on the display and the maintenance light turns off.

Share this post