Common questions

What should Toms be tuned to?

What should Toms be tuned to?

Toms are usually tuned a fourth apart (the first two notes of “Here Comes the Bride”). This is also dependent on the number of toms; drum kits with several toms may need to be tuned to closer intervals to allow all the drums to sound their best and not be tuned beyond their comfortable frequency range.

How does a Drumdial work?

The DrumDial measures 1/10th of an inch for every revolution of the needle. So each small line on the dial indicates 1/1000th of an inch. Or, the Tension Watch would move 2-1/2 small marks for every 1 small mark on the DrumDial. This is confirmed when I measure the same turn of a drum key with each device.

What causes a snare drum to ring?

Most ringing will come from tuning. Metal snares will have more ring, but tuning and head choice are the biggest factors. Make sure the tuning at each lug is the same. If it’s a metal drum, try tuning it a little lower and maybe try a Control Sound or Power Center Reverse Dot?

How do you fix a tom drum?

How to Fix Ringing Toms

  1. Use Dampening to Prevent Ringing. Your best bet is to use a mechanical solution, like dampening rings, to prevent ringing.
  2. Suppress Resonance with Dynamic EQ. If a client hands you a tom recording that contains ringing, you may have no choice but to work with what they’ve sent you.
  3. Gate the Toms.

What tension should a snare drum be?

For a quick fat snare drum: Tune all lugs to a very low even tension (usually between 1/4 and 3/4 of a drum key turn).

What note should my snare drum be?

For a 6.5″ snare drum, the pitches G – Bb are what you should listen for (Ab – B for a 5″ drum). Using your drum key, tighten each tension rod ONE EVEN HALF TURN always working in opposites across the drum until you come near the pitch. Use a piano or keyboard percussion instrument to help find your pitch.

What note is a kick drum tuned to?

When considering the kit as a whole, the pitches of each drum should compliment one another. You can even consider tuning the kit to a musical scale: Our snare drum tuned to a C (dominant) could be accompanied by a kick tuned to an F (tonic) and toms tuned to other notes of the F major scale.

How tight should Tom heads be?

Tuneful Toms Don’t rush to tighten everything up with a drum key. From finger‑tight, use the key in quarter‑turns. Working your way clockwise around most modern drums should be fine. As with the other drums, the heads of each tom‑tom should be well seated before you start tuning.

Can a Drum Tuner be used to measure tension?

Measure drum head tension directly from the drum head faster than ever before. Get the tuner that really works, get a DrumDial™ drum tuner and make it possible for your drums to consistently sound great! How to use DrumDial tuners, calibration videos, banjo tuning and more.

Can a drumdial be used to tune a drum?

You can eliminate these problems by using a DrumDial to measure drumhead tension directly from the drumhead, allowing you to precisely tune your drums faster and easier than ever before These items are shipped from and sold by different sellers. Show details In stock on May 5, 2021. Order it now.

Why are there so many cymbals in a drum kit?

Most drummers and engineers have experienced difficulties in getting the right sound from a kit: with all the different heads, snare wires, cymbals and mics around, every action in a drum kit will inevitably create a reaction somewhere else.

What do you need to know about a drum kit?

Pitch, tone and projection from a drum kit are very personal things, and, as with any instrument, it’s important to work with the musician to get the right sound for recording — but the musician may not always be aware that there are artifacts that are not desirable for recording purposes, or that they can be controlled.

Share this post